Pinterest
Kreg® Each jig position has its recommended drilling depth. To drill in 3/4" material, set the Depth Collar 3-1/2" from the Step of the drill bit using a rule. This will place the tip of the bit approximately 1/8" from the edge of the work piece. Adjust the collar to 3-5/16" from the step of the bit for 1/2" material and 4-1/4" from the step of the bit for 1-1/2" material. Tighten the setscrew with the Allen wrench.

Kreg® Each jig position has its recommended drilling depth. To drill in 3/4" material, set the Depth Collar 3-1/2" from the Step of the drill bit using a rule. This will place the tip of the bit approximately 1/8" from the edge of the work piece. Adjust the collar to 3-5/16" from the step of the bit for 1/2" material and 4-1/4" from the step of the bit for 1-1/2" material. Tighten the setscrew with the Allen wrench.

Kreg Jig Work Platform Idea Since the Kreg jig system uses its own screws, drill bits, drivers, plugs etc., a dedicated work platform with storage is a good idea. This is not actually a step by step how to build it project, but a presentation of the idea and what you can do. It's very easy to build and even to modify according to your needs or stock available. Here is how I choose to build mine:... The Jig is stationery in the center of the station and for the platform I used a piece of…

Kreg Jig Work Platform Idea

Kreg Jig Work Platform Idea Since the Kreg jig system uses its own screws, drill bits, drivers, plugs etc., a dedicated work platform with storage is a good idea.

Нанесение зажимного приспособления, которое сверлят

Whether you own a pocket-hole jig or are considering buying one, these shop-won insights will help you get more from your jig.

Avoid a sticky situation and choose the right glue.: #wwgoa

Choosing the Right Wood Glue

Wood Profits - Avoid a Sticky Situation :: Choose the Right Glue for the Job Discover How You Can Start A Woodworking Business From Home Easily in 7 Days With NO Capital Needed!

The Drawer Slide Jig takes the guesswork out of installing drawer slides. This easy-to use jig holds slides in position as you drill mounting holes in the cabinet, and it supports drawer boxes while mounting slides to the drawer. Plus, the Jig works with ball-bearing, epoxy-coated, and undermount slides for perfect positioning every time.

Install Drawer Slides the Fast, Easy Way for Drawers That Fit Perfectly Every Time and Slide Smoothly

Work Platform Ideas. Definitely MUST do for my new Kreg Jig!!!! Found on: instructables.com

Kreg Jig Work Platform Idea

Kreg Jig Work Platform Idea Since the Kreg jig system uses its own screws, drill bits, drivers, plugs etc., a dedicated work platform with storage is a good idea.

kreg table

A guide to the use of a Kreg Pocket Hole Jig, showing how to use it for different board thicknesses.