Utforsk disse og flere idéer!

Bench-top Box/Pan Sheet Metal Brake, by J. Hartnell | Flickr

Bench-top Box/Pan Sheet Metal Brake, by J. Hartnell | Flickr

Finger Brake - Homemade finger brake constructed from steel.

Finger Brake - Homemade finger brake constructed from steel.

This bench-top box/pan brake can bend sheet metal into various shapes. It mounts to a workbench. It can accept up to four foot wide stock and bend 135 degrees. With the various width teeth, they can be adjusted to fit the width of the bend needed within minutes with one wrench. The clamping thickness can be adjusted from 0 to about 0.25 inches, but I would be extremely lucky to bend something that thick. The throat can open to over four inches. This brake was built from scrap I received…

This bench-top box/pan brake can bend sheet metal into various shapes. It mounts to a workbench. It can accept up to four foot wide stock and bend 135 degrees. With the various width teeth, they can be adjusted to fit the width of the bend needed within minutes with one wrench. The clamping thickness can be adjusted from 0 to about 0.25 inches, but I would be extremely lucky to bend something that thick. The throat can open to over four inches. This brake was built from scrap I received…

Fractions of an inch to MM. Always handy. Might be handy to print off and keep around actually

Fractions of an inch to MM. Always handy. Might be handy to print off and keep around actually

This bench-top box/pan brake can bend sheet metal into various shapes. It mounts to a workbench. It can accept up to four foot wide stock and bend 135 degrees. With the various width teeth, they can be adjusted to fit the width of the bend needed within minutes with one wrench. The clamping thickness can be adjusted from 0 to about 0.25 inches, but I would be extremely lucky to bend something that thick. The throat can open to over four inches. This brake was built from scrap I received…

This bench-top box/pan brake can bend sheet metal into various shapes. It mounts to a workbench. It can accept up to four foot wide stock and bend 135 degrees. With the various width teeth, they can be adjusted to fit the width of the bend needed within minutes with one wrench. The clamping thickness can be adjusted from 0 to about 0.25 inches, but I would be extremely lucky to bend something that thick. The throat can open to over four inches. This brake was built from scrap I received…

CNC Cookbook: Blog Posts for Jul thru Sep 2006

CNC Cookbook: Blog Posts for Jul thru Sep 2006

Metal Chop Saw Clamp

Metal Chop Saw Clamp

Escuadras para armar marcos rectangulares - Página 2

Escuadras para armar marcos rectangulares - Página 2

СКАМЕЙКА TITTA - FRAME | A.U.ESSE

СКАМЕЙКА TITTA - FRAME | A.U.ESSE

Roladora Dobladora Manual La Argentina Caños Perfiles Hierro - $ 10.990,00

Roladora Dobladora Manual La Argentina Caños Perfiles Hierro - $ 10.990,00

Pinterest
Søk