More ideas from Adam
Insagram: Withered_perceptionI have some rust on my driveway and some old rusty tools I got from my grandfather years ago. I have been looking at sand and soda...

Insagram: Withered_perceptionI have some rust on my driveway and some old rusty tools I got from my grandfather years ago. I have been looking at sand and soda.

Cut with a Drill - If you need to shorten a bolt, let your drill do the hard work. Spin two nuts onto the bolt, tightening them against each other. Then chuck the bolt into the drill and hold a hacksaw blade against the spinning bolt. The nuts help to steady the blade and clean off burrs when you unscrew them.

Spin two nuts onto the bolt, tightening them against each other. Then chuck the bolt into the drill and hold a hacksaw blade against the spinning bolt. The nuts help to steady the blade and clean off burrs when you unscrew them.

Cut legs A & rails B, C to size. Cut hand hole & mortises for hinges in back rail. Cut half lap joints in legs & rails. Lay assembly on bench & clamp swing-leg assemblies on top in open position. Make sure top edges & outside faces of swing-leg rails